Royal Enfield METEOR MINOR STANDARD 1958 Workshop Maintenance Manual page 39

and moulded terminal nut from the defective
cable. Thread the new cable through the moulded
terminal nut and cut back the insulation for about
¼ in. Pass the exposed strands through the metal
washer and bend them back radially. Screw the
terminal into the pick-up moulding.
Section G2j Page 4
To connect the cable to ignition coil model
MA6, pass the cable through the rubber
grommet, push the metal clip into the end of the
cable (which should be cut off square), insert the
cable and clip into the socket in the end of the
coil, and slide the grommet into place to exclude
water.