MA lighting grandMA3 onPC command wing XT Quick Manual page 18

-A warning pop-up appears:
-Tap OK .
-Shutdown the Windows system.
-The grandMA3 onPC command wing XT powers down.
Important:
Do not switch off the grandMA3 onPC command wing XT too early.
Make sure that you wait until Windows has completely shutdown.
All LEDs on the grandMA3 onPC command wing XT must have turned off.
-Set the power switch to position O .
-Show data is only saved in the grandMA3 onPC software.
-For updates use the grandMA3 onPC software.
18
Intended Use
Safety
Support
Transport
Limitations
Quick Start
Maintenance
Disposal
Technical Data
Declaration of Conformity