M-Audio Oxygen Pro Series User Manual page 83

When set to Program Cycle, these are the available parameters:
Values: The Clip button will cycle through this many Program values (one at a time) when you
press it: 2 Values, 3 Values, or 4 Values.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First: The Clip button will send this Program message first when you press it.
Available Values: 0-127
Second: The Clip button will send this Program message second when you press it.
Available Values: 0-127
Third: The Clip button will send this Program message third when you press it.
Available Values: 0-127
Last: The Clip button will send this Program message last when you press it.
Available Values: 0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type: The Clip button will send the next (Increment) or previous (Decrement) value number in
the range of values when you press it.
Min: The lowest Program value in the range of values will correspond with this setting.
Available Values: 0-127
Max: The highest Program value in the range of values will correspond with this setting.
Available Values: 0-127
When set to Note, these are the available parameters:
Note: The Clip button will send its MIDI messages using this Note number.
Available Values: C-2 – G8
Latch: When set to Latch On, the Clip button will send one value when pressed and a different
value when pressed a second time, alternating between the two values with each press. When
set to Latch Off, the Clip button will send one value when pressed and one value when
released.
Available Values: On/Off
83