Saving A User Daw - M-Audio Oxygen Pro Series User Manual

Saving a User DAW

To store a User DAW:
1. Press SHIFT and the DAW button to enter Edit Mode.
2. Edit a control as outlined in the
3. Press the DAW button.
4. The display will show "SAVE?" with the following selections available.
•
Cancel: Selecting "Yes" to Cancel will revert any changes made.
•
Replace: Selecting "Yes" to Replace will write over the currently selected preset.
•
Save As: Selecting "Yes" to Save As enable you to edit/change what the DAW's
name "NAME" is. The last available selection in the Save As screen is Save. Pressing
"Yes" on the Save screen will save your new User DAW.
Note: When editing a DAW name, use the Encoder to scroll to a letter you want to edit and
press the Encoder to select the current letter. To erase a letter in a DAW name, press SHIFT
and the Back button.
DAW Edit Mode section of this guide.
102