M-Audio Oxygen Pro Series User Manual page 75

When set to CC IN/DC, these are the available parameters:
CC: The pad will send its MIDI messages using this CC number.
Available Values: 0-127
Type: The pad will send the next (Increment) or previous (Decrement) value number in the
range of values when you press it.
Min: The lowest value in the range of values will correspond with this setting.
Available Values: 0-127
Max: The highest value in the range of values will correspond with this setting.
Available Values: 0-127
When set to Program, these are the available parameters:
Program: The pad will send this program number when you press it.
Available Values: 0-127
MSB: The pad will send this Bank MSB (Most Significant Byte) number when you press it.
Available Values: 0-127
LSB: The pad will send this Bank LSB (Least Significant Byte) number when you press it.
Available Values: 0-127
When set to Program Cycle, these are the available parameters:
Values: The pad will cycle through this many Program values (one at a time) when you press
it: 1 Values, 2 Values, 3 Values, or 4 Values.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First: The pad will send this Program message first when you press it.
Available Values: 0-127
Second: The pad will send this Program message second when you press it.
Available Values: 0-127
Third: The pad will send this Program message third when you press it.
Available Values: 0-127
Last: The pad will send this Program message last when you press it.
Available Values: 0-127
75