Smart Scale Button - M-Audio Oxygen Pro Series User Manual

Select First, to set the lowest key that will correspond to the Smart Chord range.
Select Last, to set the highest key that will correspond to the Smart Chord range.
Note: When the First or Last Note is selected in Chord Edit mode you can press a key on the
keybed to enter the First or Last note. The enables you to make a quick selection and avoid
using the Encoder to make a selection.
Select Channel, to set what channel the Smart Chord split will send on.
• Split: When Split is set to On, the Chord assignment can be assigned to a specific section
of the keybed, like a Zone assignment.
• Chan: If Split is enabled, the Smart Chord will send its messages over this channel. Select
the global channel (Global) or a specific channel (Channel 1–16).

Smart Scale Button

When this button is pressed, it will activate the keyboard's internal Smart Scale functionality.
The current scale is based on the current Smart Scale settings (in the Smart Scale Edit menu).
The Smart Scale functionality will only function on notes being played on the keyboard. When
Smart Scale Mode is active, keys will only play notes in the key of the current key and scale
selection. This functionality is available in the 2 keyboard modes, DAW, PRESET.
To edit the Smart Scale settings, press SHIFT and the SCALE button.
•
KEY: Selects what key Smart Scale is in.
•
SCALE: Selects what scale Smart Scale will use. Press the Encoder on Scale and select
what scale you want to apply:
Mixolydian, Minor Harmonic, Locrian, Minor, Minor Melodic, Pentatonic Major,
Pentatonic Minor, Blues, Altered Dominant, Diminished Whole Half, and Whole
Tone.
To set a Split for Smart Scale, click the Encoder in Split, and select On. With Split active/on,
Smart Scale can be assigned to a specific section of the keybed, like a Zone assignment
Select First, to set the lowest key that will correspond to the Smart Chord range.
Select Last, to set the highest key that will correspond to the Smart Chord range.
Note: When the First or Last Note is selected in Scale Edit mode you can press a key on the
keybed to enter the First or Last note. The enables you to make a quick selection and avoid
using the Encoder to make a selection.
Select Channel, to set what channel the Smart Chord split will send on.
Chromatic, Major, Dorian, Phrygian, Lydian,
105