Table of Contents
Advertisement
Select Last, to set the highest key that will correspond to the arp range.
Note: When the First or Last Note is selected in Arp Edit mode you can press a key on the
keybed to enter the First or Last note. The enables you to make a quick selection and avoid
using the Encoder to make a selection.
Select Channel, to set what channel the ARP split will send on.
Smart Chord/Smart Scale Button
When this button is pressed, it will activate the keyboard's internal Smart Chord functionality.
The Smart Chord functionality can function on notes being played on the keyboard or pads, or
both depending on the selection in the GLOBAL SETTINGS menu. When Smart Chord mode
is active a single key press will play a chord as selected in the current Smart Chord Edit
options. This functionality is available in the 2 keyboard modes, DAW, PRESET.
When this button is double tapped/pressed, it will activate the keyboard's internal Smart Scale
functionality. The current scale is based on the current Smart Scale settings (in the Smart
Scale Edit menu). The Smart Scale functionality will only function on notes being played on the
keyboard. When Smart Scale Mode is active, keys will only play notes in the key of the current
key and scale selection. This functionality is available in the 2 keyboard modes, DAW,
PRESET.
To activate the Smart Chord functionality, press the CHORD/SCALE button.
To deactivate the Smart Chord functionality, press the CHORD/SCALE button.
To activate the Smart Scale functionality, double tap the CHORD/SCALE button.
To deactivate the Smart Scale functionality, double tap the CHORD/SCALE button.
If Chord is active, then the CHORD/SCALE button will be lit to show that the Chord is active.
If Scale is active this button will be flashing/blinking.
To edit the Smart Chord or Smart Scale settings, press SHIFT and the CHORD/SCALE
button and select Chord. There is a selection for Smart Chord and Smart Scale for indepent
editing over the two modes.
Mode:
•
Smart mode lets you select the key of the song (ex. C Major). When a key is pressed on
the physical keyboard, a chord will play in that key.
•
Custom mode lets you input a custom chord. Once a chord has been input, press a key
on the physical keyboard to play a chord. To create a Custom chord, press the Encoder
into the Custom field, then either use the Encoder to select the desired note, or press a
key for the notes you would like to enter. There are 6 available Notes in Custom chord
mode.
Note 1: The first note in the custom Chord.
o
Note 2: The second note in the custom Chord.
o
Note 3: The third note in the custom Chord.
o
Note 4: The fourth note in the custom Chord.
o
Note 5: The fifth note in the custom Chord.
o
Note 6: The sixth note in the custom Chord.
o
63
Advertisement
Table of Contents
