Instructions Of Use - Jata electro BT170N Instructions Of Use

Electronic inox stick blender
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
seconds. After this period of time allow to cool for
some minutes before using it again.
• Do not use the blender empty.
• Do not use it outdoors.
• Don't allow children play with the appliance. Keep
the appliance out of the reach of children.
• Make sure neither the appliance nor the cable are
in direct contact with hot surfaces or objects.
• Always disconnect it from the mains when you do
not use it and before assembling / disassembling or
when cleaning.
• Take care with the blade of the stick because it is
very sharp.
• If the cable were to deteriorate it must be changed
by an Authorised Service Centre.

INSTRUCTIONS OF USE

• Remember that when you place or replace the stick, the blender must be disconnected of the mains.
• To insert the stick (4) into the body (3) make coincide the indication (
the indication▼
placed in the body. Next turn the stick to the (
correctly fixed.
• To release the stick, turn it till the indication of the stick (
body
.
• Put the stick into the foods and press the power pushers having in mind that:
- Pusher I: Minimum power.
- Pusher Turbo: Maximum power.
• You can regulate the power of the blender by turning the regulator (5) in one or another way.
Turn the regulator to the MIN position for a lower power. Turn it to the MAX direction for a higher
power.
ATTENTION
• This regulator only works if the blender is the in minimum power (Pusher I). In the maximum power
(Pusher Turbo) the regulator doesn't work.
) placed in the stick with
) position till the end to leave it
), coincide with the indication of the
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

8421078031260

Table of Contents