Accessories - Riello RS 64/M MZ Installation, Use And Maintenance Instructions

• KIT FOR LPG OPERATION: The kit allows the RS 64/M MZ burner to operate on LPG.
Output kW
Blast tube lenght mm
Code
• KIT FOR MODULATING OPERATION
OUTPUT POWER REGULATOR KIT RWF40
Two components should be ordered:
• the Output power regulator to install on the burner;
• the Probe to install on the heat generator
Parameter to control
Adjustment field
Temperature - 100...+500°C
0...2.5 bar
Pressure
0...16 bar
• KIT LONG HEAD: code 3010427
• CLEAN CONTACTS KIT: code 3010419
• POTENTIOMETER KIT FOR THE INDICATION OF LOAD POSITION: code 3010109
• KIT INTERFACE ADAPTER RMG TO PC: code 3002719
• GAS TRAINS TO COUPLE WITH THE BURNER, ACCORDING TO REGULATION EN 676 (with valves, pressure governor and filter):
see page 22.
• RADIO DISTURBANCE PROTECTION KIT: code 3010386
If the burner is installed in places particularly subject to radio disturbance (emission of signals exceeding 10 V/m) owing to the presence of an
INVERTER, or in applications where the length of the thermostat connections exceeds 20 metres, a protection kit is available as an interface between
the control box and the burner.
IMPORTANT:
the installer is responsible for the addition of any safety device not forseen in the present manual.

ACCESSORIES

(optional)
400 - 920
250
3010434
Probe
Type Code
PT 100
3010110
Output probe
3010213
4...20 mA
3010214
59
385
3010435
Output power
regulator
Type Code
RWF40
3010212