A.B.S. Flexilo TROUGH Assembly-, Operating-, And Filling Instructions page 24

Operating and Assembly Instructions – A.B.S. Flexilo TROUGH for wood pellets
Final inspection
Cone holding frame with corner angle
Split Design:
All six bars of the cone holding frame are to be bolted together after they have been inserted
into the intended loops on the silo sack.
The two cone support bars on the long side (the side with the split bars) are to be bolted
together using the connection piece (see pictures below).
Subject to technical change Issue 09/2016 Page 24 of 33
©A.B.S. Silo- und Förderanlagen GmbH