A.B.S. Flexilo TROUGH Assembly-, Operating-, And Filling Instructions page 14

Operating and Assembly Instructions – A.B.S. Flexilo TROUGH for wood pellets
Scope of delivery
included:
8
32 x (44 x)
48 x (68 x)
* In brackets only by Split Design
included:
9
8 x (12 x)
* In brackets only by Split Design
10
11
Subject to technical change
©A.B.S. Silo- und Förderanlagen GmbH
16 x (24 x)
16 x (24 x)
8 x (12 x)
resp.
Issue 09/2016
Screw sack with connecting
material for drawing irons
32 hexagon screws M12 x 30
16 hexagon nuts M12
48 washers U13
Split Design
44 hexagon screws M12 x 30
24 hexagon nuts M12
68 washers U13
Screw sack with connecting
material for supporting bolt
8 screws M12 with shaft
16 washers U13
8 screw nuts M12 self locking
Split Design
12 screws M12 with shaft
24 washers U13
12 screw nuts M12 self locking
Supporting bolt screws after
support:
60x60 M12 x 90
80x60 M12 x 110
80x80 M12 x 110
120x80 M12 x 150
140x80 M12 x 170
1 - 2 pieces
Filling-pipe respectively filling-
injector
At a rack width of 2.20 m the Flexilo
delivered with a filling injector and from a
rack width of 2.50 m 2 filling pipes are
attached.
1 piece per filling pipe
1 fastener 36/36
2 pipe clamps M10/M12
(pre-assembled on the fastener)
Page 14 of 33
®
is