Daikin Perfera CTXM-R User Reference Manual page 37

To connect using SSID and KEY number
To reset the connection setting to the factory default
CTXM15+FTXM20~42R5V1B + CTXM15+FTXM20~71R2V1B
Daikin room air conditioner
4P518786-5F – 2020.06
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
5 Press to exit the menu.
Result: The display will return to the default screen.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The timer LED and operation LED are blinking
simultaneously.
4 Open the Daikin Residential Controller application on your smart device and
follow the steps on the screen.
Result: If the connection to your smart device is successful, the timer LED is
blinking in 1.0 s interval and the operation LED is off.
5 Press to exit the menu.
Result: The display will return to the default screen.
Reset the connection setting to the factory default in case you want to:
▪ disconnect the wireless LAN and the communication device (e.g. router) or smart
device,
▪ repeat the setting if the connection was unsuccessful.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Hold for at least 2 seconds to confirm the selection.
Result: is blinking. The operation and timer LEDs are blinking at the same
time in 1 s interval. The setting is reset to the factory default.
4 Press to exit the menu.
Result: The display will return to the default screen.
4
37].
for at least 5 seconds while the unit is not
twice or
2×
for at least 5 seconds while the unit is not
twice or
2×
6 Operation
|
"To connect using
repeatedly.
repeatedly.
User reference guide
37