Daikin Perfera CTXM-R User Reference Manual page 36

6 | Operation
To connect the wireless LAN to your home network
To connect using the WPS button
User reference guide
36
2 Press to confirm the selection.
Result: is blinking.
3 Check the operation and timer LEDs on the indoor unit display.
ON/
OFF
a Operation LED
b Timer LED
If operation LED... ...and timer LED...
blinks blinks
is off blinks in 0.5 second
interval
is off blinks in 1 second
interval
4 Press to exit the menu.
Result: The display will return to the default screen.
The wireless adapter can be connected to your home network using the:
▪ WPS button on the router (if present),
▪ SSID and KEY number located on the unit.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The timer LED is blinking in 0.5 s interval and the
operation LED is off.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: If the connection to your communication device is successful, the
timer LED is blinking in 1.0 s interval and the operation LED is off.
a
b
...then wireless LAN is...
not connected
running and ready to connect to the
home network via WPS button on
the router.
▪
or
▪
for at least 5 seconds while the unit is not
once or
1×
CTXM15+FTXM20~42R5V1B + CTXM15+FTXM20~71R2V1B
connected to the home network
via SSID + KEY.
connected to the home network
via WPS button on the router.
repeatedly.
Daikin room air conditioner
4P518786-5F – 2020.06