Changing Color Panels - Frigidaire FDB835RFT0 Use And Care Manual

Changing Color
Panels
STEP 1
STEP 2
Side
Trim
STEP 3
STEP 4
Color
Panel(s)
Bottom
Trim
Spacer
Color Panel(s)
Control Panel
Color Panel(s)
Bottom
Trim
Bottom Edge of Door
Some models come with reversible door panel
inserts.
To change the color panel:
1. Remove snap-on bottom trim by pulling
forward. Support color panel(s) at bottom
while removing trim. Slide color panel(s)
downward 1/2 ".
2. Grasp top and bottom of panels and bow
slightly until they are clear of trim. DO NOT
REMOVE SPACER.
3. Arrange panel(s) so desired color is facing
out. Place one side of panel under side trim
and bow slightly until other side fits under
opposite trim. Slide panel(s) up to fit under
control panel.
4. Replace bottom trim by fitting slot over
bottom edge of door and press to secure.
Customized Wood Panels
Some models can be customized with
1/4" wood panels. Refer to your installation
instructions for more information.
13
Cut Hazard
Metal door panels are sharp
and should be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.