Changing Color Panels - Frigidaire 200 Series Use & Care Manual

Metal door panels are sharp
and should be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
Some models come with reversible door panel
inserts.
1. Remove snap-on bottom trim by pulling
forward. Support color panel(s) at
bottom while removing trim. Slide color
panel(s) downward 1/2”.
2. Grasp top and bottom of panel(s) and
bow slightly until they are clear of trim.
DO NOT REMOVE SPACER.
3. Arrange panel(s) so desired color is facing
out. Place one side of panel under side
trim and bow slightly until other side fits
under opposite trim. Slide panel(s) up to
fit under control panel.
4. Replace bottom trim by fitting slot over
bottom edge of door and press to secure.
Your dishwasher can be customized with 1/4”
wood panels. Refer to your installation
instructions for more information.
!