Changing Color Panels - Frigidaire 600 Series Use & Care Manual

Changing Color Panels
STEP1
Panel(s)
Cut Hazard
Metal door panels are sharp
and should be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
STEP 2
Side --
Trim
STEP 3
STEP 4
;pacer
Trim
Color Panel(s)
Panel
Panel(s)
Some models come with reversible door panel
inserts.
To change the color panel:
,
,
Remove snap-on bottom trim by pulling
forward. Support color panel(s) at bottom
while removing trim. Slide color panel(s)
downward 1/2"
Grasp top and bottom of panel(s) and bow
slightly until they are clear of trim. DO NOT
REMOVE SPACER.
,
,
Arrange panel(s) so desired color is facing
out. Place one side of panel under side
trim and bow slightly until other side fits
under opposite trim. Slide panel(s) up to fit
under control panel.
Replace bottom trim by fitting slot over
bottom edge of door and press to secure.
Customized Wood Panels
Some models can be customized with
1/4" wood panels. Refer to your installation
instructionsfor more information.
Trim
Bottom Edge of Door
11