Changing Color Panels - Frigidaire FDB635RFS6 Use & Care Manual

Changing Color Panels

STEP 1
STEP 2
Side
Trim
STEP 3
STEP 4
Color
Panel(s)
Bottom
Trim
Spacer
Color Panel(s)
Control Panel
Color Panel(s)
Bottom
Trim
Bottom Edge of Door
Metal door panels are sharp
and should be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
Some models come with reversible door panel
inserts.
To change the color panel:
1. Remove snap-on bottom trim by pulling
forward. Support color panel(s) at bottom
while removing trim. Slide color panel(s)
downward 1/2 ".
2. Grasp top and bottom of panel(s) and bow
slightly until they are clear of trim. DO NOT
REMOVE SPACER.
3. Arrange panel(s) so desired color is facing
out. Place one side of panel under side
trim and bow slightly until other side fits
under opposite trim. Slide panel(s) up to fit
under control panel.
4. Replace bottom trim by fitting slot over
bottom edge of door and press to secure.
Customized Wood Panels
Some models can be customized with
1/4" wood panels. Refer to your installation
instructions for more information.
13
Cut Hazard