Microlife BP3GU1-8X Instruction Manual page 16

4. Using your blood pressure monitor for the first time
4.1. Inserting the batteries
After unpacking your device, insert the
batteries. The battery compartment is
located on the bottom of the device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AAA 1.5 V),
observing the indicated polarity.
c) If a battery warning appears in the
display, the batteries are discharged and
must be replaced.
Attention!
• After the low battery indicator appears,
the device won't function until the batteries
have been replaced.
• Please use "AAA" Long-Life or Alkaline
1.5 V batteries and replace them all at the
same time..
• If the blood pressure monitor is not used
for long periods, remove the batteries
from the device.
• We do not recommend using recharge-
able batteries with this device.
14
Low Battery Indicator