Table of Contents
Advertisement
1 ABOUT THE LATiTUdE S1 SmArT SNOW HELmET
4. After pushing the "Chinstrap Pad" back, adjust the chinstrap tension
at the buckle with the strap adjuster in the proper position. Adjust
the tension so the chinstrap is tight yet comfortable by pulling the
chinstrap end through the buckle to either tighten or loosen the strap
as needed.
5. Secure the excess strap with the "O-Ring" and then pull the
"Chinstrap Pad" again.
6. Always wear the helmet with the chinstrap buckle fastened and with
the chinstrap pulled tight and positioned against the throat. With the
strap buckled and the helmet properly positioned, you should feel
the chinstrap pull firmly against your chin when you open your mouth.
When properly adjusted, the helmet will wrap around your head and
cradle it with firm, but comfortable pressure.
7. Try strapping your goggles on. If the helmet is on correctly you won't
be able to scratch your forehead.
8. Your helmet is equipped with an adjustable retention system which
helps stabilize the helmet in the correct position when you ride. When
wearing the helmet, turn the retention system knob clockwise to
tighten the helmet or counterclockwise to loosen the helmet.
WARNING: For maximum protection, this helmet must be fitted
and attached properly to the wearer's head in accordance with the
following instructions. If after adjustment the helmet does not fit
properly, do not use the helmet. Return it to the retailer or Sena.
retention System Knob
Latitude S1 Smart Snow Helmet | 7
Advertisement
Table of Contents
