Charger - URBANGLIDE H1 User Manual

- First, insert and turn the key into the key slot on the battery to turn it on.
- Turn on the control panel by pressing the Power button.
- Get on the bike and start pedalling, the electric assistance will start to help you, check your speed on the
screen, if you exceed 25km/h or if you stop pedalling the electric assistance will automatically deactivate
for your safety.
- When you are not on the bike, turn it to "OFF" by pressing and holding the Power button for 3 seconds.
- Then turn off your bike's battery by turning and removing the key from your battery .
Tilt the seat forward by squeezing the trigger underneath.
You have two options:
1. Insert the charger in the loading port
2. Remove the battery and insert the charger into the charging port.
Switching on and use

Charger

Your device is charging. Please wait until the color changes.
When your device is charged, unplug it and also disconnect the
charger from its power source.
Loading
7