Installing The Raid Driver And Operating System - Gigabyte Z590 AORUS XTREME WB User Manual

3-2

Installing the RAID Driver and Operating System

With the correct BIOS settings, you are ready to install the operating system.
As some operating systems already include RAID driver, you do not need to install separate RAID driver during
the Windows installation process. After the operating system is installed, we recommend that you install all
required drivers from the motherboard driver disc using "Xpress Install" to ensure system performance and
compatibility. If the operating system to be installed requires that you provide additional RAID driver during the
OS installation process, please refer to the steps below:
Step 1:
Boot from the Windows setup disc and perform standard OS installation steps. When the screen requesting you
to load the driver appears, select Browse.
Step 2:
Insert the provided AORUS USB flash drive and then browse to the location of the driver. The location of the
driver is as follows:
Boot\IRST\f6flpy-x64
Step 3:
When a screen as shown in Figure 1 appears, select Intel(R) Chipset SATA/PCIe RST Premium Controller
and click Next to load the driver and continue the OS installation.
Figure 1
Configuring a RAID Set - 70 -