Gigabyte Z590 AORUS XTREME WB User Manual page 32

10) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
Connect the thermistor cables to the headers for temperature detection.
EC_TEMP1
11) LED_C1/LED_C2 (Integrated Extension Cable Headers for Addressable and RGB LED Strips)
Connect the included integrated extension cable for addressable and RGB LED strips to the header. The
other two ends of the cable can respectively connect to a standard 5050 RGB LED strip (12V/G/R/B), with
maximum power rating of 2A (12V) and maximum length of 2m and a standard 5050 addressable LED
strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. Before connecting your
LED strip, remove the cap from the integrated extension cable. The power pin of the LED strip must be
connected to Pin 1 of the LED strip header. Incorrect connection may lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 5, "Unique
Features," "APP Center\RGB Fusion."
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Hardware Installation
EC_TEMP2
Pin No. Definition
1
Addressable
RGB LED strip
LED strip
Integrated extension cable for
addressable and RGB LED strips
- 32 -
1 SENSOR IN
2 GND
Addressable LED Strip Connector:
Pin No. Definition
1 V (5V)
2 D
3 No Pin
4 G
RGB LED Strip Connector:
Pin No. Definition
1 12V
2 G
3 R
4 B