Cabinet Adjusments, Servicing & Component Replacement (cont.)
Fig. 4. Carefully remove the door.
Fig. 5. Align the left edge of the right door with the left edge of the True logo.
Fig. 6. Align the right edge of the left door with the right edge of the TRUE logo.
Page 26 of 32
S C I E N T I F I C S E R I E S
Fig. 7. Remove the door cord from the roller bracket.
Fig. 8. Slide the the black tab holding the door cord out the back
Fig. 9. Be sure the door cord is in the roller slot closest to the pulley.
10/12/2020
truemfg.com
TEC_TM_098 REV. A