True TSCI Series Installation Manual page 15

Electronic Temperature Control (cont.)
Change the Set Point
Changing the set point adjusts the cabinet temperature to
keep optimal product temperature.
1. Press and hold info
set point. DO NOT RELEASE THE BUTTON!
2. While holding info, press the up
to adjust the setting.
3. Release all buttons and wait for the control to display the
current cabinet temperature.
TEC_TM_098 REV. A
S C I E N T I F I C S E R I E S
L A E C O N T R O L L E G E N D
until the display shows the current
or down arrows
Compressor Running
Evaporator Fan Running
Cabinet in Defrost
Activation of 2 nd
Alarm
Initiate Manual Defrost
A manual defrost clears accumulated frost and ice from the
evaporator coil. The defrost will only terminate when a specific
preset temperature or duration has been met.
Press Manual Defrost
10/12/2020
Info/Set Point
Parameter Set
Manual Defrost/
Down Arrow
until the display shows deF.
truemfg.com
Manual Activation/
Up Arrow
Stand-By/
Cancel
Page 15 of 32