Blower Function; Finish Operation - Lavor Free vac Instructions Manual

HOW TO PREPARE AND USE VACUUM
CLEANER
Before you use your vacuum cleaner for the first
time, you must charge the battery completely see
"Charging the battery".
Unplug the charger cord from the vacuum cleaner.
If the charger remains connected to both the
power point and to the appliance, the latter will
not function.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
•Never use the appliance without filters .
(see fig.④⑤) Insert the suitable filters for the
proper use.
Accessories and filter NOT suitable for ash suction
Accessories and filter suitable for ash suction .
• Make sure the filter N is fitted in its housing .
• Use the most suitable accessories for the reque-
sted usage.
START UP
GREEN
To activate suction, press the main ON/OFF button;
the green LED turns on,
signalling that suction is at 50% (in energy saving
mode).
ORANGE
To increase suction to its maximum level, press
"MAX"; the orange LED turns on.
To deactivate suction, press the main ON/OFF but-
ton.
Next time you turn suction on, it will be again at
50% in energy saving mode.
12
HOW TO PREPARE AND USE THE ASH VA-
CUUM CLEANER
Accessories and filter suitable for ash suction .
• Connect the metal hose F1 to its fitting T .
• Connect the metal straight lance F2.
• Before vacuuming the ash, check that it is cold
and no longer alight.
Do not vacuum burning embers
• Do not empty the drum into a container which
is easily inflammable and make sure that the
ashes are completely cool.
• Vacuum the ash directly from the fireplace or
from the stove (wood or pellet-burning). Hold the
suction nozzle about 1 cm. above the ash.
• If the metal hose becomes hot during use, turn the
device off immediately and let it cool.

BLOWER FUNCTION

•Never use the appliance without filters
• Insert the suitable filters and accessories for the
proper use.

FINISH OPERATION

Turn on the appliance.
Completely empty the tank.
ARANCIONE VERDE