Replacing The Fuel Filter; Servicing The Carbon Canister - Toro Workman GTX Series Operator's Manual

Replacing the Fuel Filter

Service Interval: Every 400 hours/Yearly (whichever
comes first)
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
4. Raise the bed and support it with the prop rod.
5. Disconnect the battery; refer to
the Battery (page
6. Place a clean container under the fuel filter and
replace the fuel filter as shown in
Figure 45
7. Connect the battery and lower the cargo bed;
refer to Connecting the Battery (page
Disconnecting
41).
Figure
43).
Servicing the Carbon
Canister
Checking the Air Filter for the
Carbon Canister
Service Interval: After the first 50 hours
Every 200 hours
Check the opening at the bottom of the air filter for the
carbon canister to ensure that it is clean and free of
debris and obstructions
45.
Clean the air filter for the carbon canister with clean,
compressed air.
Located Beneath the Driver's Seat
1. Air-filter opening
g029685
40
(Figure 46).
Figure 46
g034099