Table of Contents
Advertisement
3.2
Commissioning
Pressgun Picco 6 press machine with battery
CAUTION!
Risk of crushing by operating the press
machine without press jaws!
If no press jaw is inserted, your fingers may get caught in
the danger zone and get crushed when the press machine
starts up.
Do not use the press machine without a press jaw
n
inserted.
Do not put your fingers in the danger zone.
n
CAUTION!
Risk of device damage due to failure to fully
lock the retaining bolt!
If the retaining bolt is not fully inserted and locked, the
cylinder may tear during pressing.
Ensure that the retaining bolt is locked before starting
n
pressing.
▶
Check the scope of delivery.
▶
Insert the fully charged lithium ion rechargeable battery into the
mounting bracket at the handle.
INFO!
Press the charging status button to check the bat‐
tery charge level. The display extinguishes as soon as the
button is released again.
▶
Turn the retaining bolt lever of the retaining bolt by 180° to release it
from the lock position.
▶
Pull out the retaining bolt.
Handling
18
Advertisement
Table of Contents
