Table of Contents
Advertisement
Status LED
Start button
Reset button
Rotatable cylinder head
Pressgun Picco 6 press machine with battery
The LED indicates the current status of the press machine.
LED indicator
The LED is continuously illumi‐
nated.
The LED flashes continuously.
The LED flashes twice then
pauses. The display repeats.
The LED flashes three times then
pauses. The display repeats.
Use the Start button to turn on the press machine (standby mode).
Press the Start button again to trigger a pressing.
If a malfunction occurs and the press machine fails to complete the
pressing, press the Reset button to return the roller head to its initial
position; see
Ä Chapter 3.4 'Aborting the pressing process' on page 21.
The press jaw fixture in the front part of the cylinder head is 270° rotat‐
able to allow for flexible alignment of the press jaws to the pressing
point.
Product information
Explanation
The press machine is switched
on.
The battery needs charging.
The press machine is outside the
permitted temperature range
(-10°C to 50°C).
30,000 strokes have been
reached or exceeded. Mainte‐
nance is due.
The press machine has a mal‐
function.
16
Advertisement
Table of Contents
