Advertisement
When the system management services (SMS) menu is displayed in the
8.16
terminal session over the connection that you set up in step 8. 1 , choose
Select Boot Options
the initial boot device.
Install the Virtual I/O Server.
8.17
1.
Select the console, and press Enter.
2.
Select a language for the BOS menus, and press Enter.
3.
Select
Start Install Now with Default Settings
4.
Select
Continue with Install
installation is complete, and the login prompt is displayed on the ASCII
terminal.
Tip: Additional Information about the Virtual I/O Server, such as how to check for
updates, configure network connections, and configure partitions, is located in the
IBM Systems Hardware Information Center.
You have completed the basic setup. Continue to task 9 Finish your system setup.
and follow the menu options to set the optical drive as
. The managed system restarts after the
.
Advertisement
