Advertisement
Cable the server and access the Integrated
8
Virtualization Manager
Connect one end of a serial cable to the system port on your server, and the other
8.1
end to a serial port on a PC that has Microsoft Internet Explorer 6.0, Netscape 7 . 1 , or
Opera 7 .23 installed.
CAUTION: This product is equipped with a 3-wire (two conductors and a
ground) power cable and plug. Use this power cable with a properly
grounded electrical outlet to avoid electrical shock. (C018)
Route the power cords through the rings or clamps, if available, on the back of the
8.2
server, and connect the server to a power source. Wait for the control panel on the
front of the server to display
Connect an Ethernet cable from the PC to the port labeled HMC1 on the back of
8.3
the server. If HMC1 is occupied, use the port labeled HMC2.
If you are using any optional adapters, connect the cables to the appropriate
8.4
adapter connectors in the PCI slots of your server and PC.
01
. This might take several minutes.
Advertisement
