Preparation Before Installation; Standard Parts; Installation Site - Gree Ultra Heat GMV Multi VRF Series Owner's Manual

Ultra Heat GMV Multi VRF

3 Preparation before Installation

Note: The picture is only used for reference and the actual product prevails. Unit: mm (inch).

3.1 Standard Parts

Please use the following standard parts supplied by Gree.
Number Name
1 Owner's Manual
Wiring (match with
2
resistance)
3 Mark (master)

3.2 Installation Site

Install the unit at a place where is adequate to withstand the weight of the unit and make sure the unit would not shake
Never expose the unit under direct sunshine and rainfall. Install the unit at a place where is against dust, typhoon and
Try to keep the unit away from combustible, inflammable and corrosive gas or exhaust gas.
Leave some space for heat exchanging and servicing so as to guarantee unit normal operation.
Keep the indoor and outdoor units close to each other as much as possible so as to decrease the pipe length and
Never allow children to approach to the unit and take measures to prevent children touching the unit.
3.2.1 Space requirement for the surround of outdoor unit
When the outdoor unit is totally surrounded by walls, please refer to following figures for space
dimension.
Parts for Outdoor Unit
Picture Quantity
WARNING
or fall off.
earthquake.
bends.
5
Remarks
1
The resistance must be connected
to the last IDU of communication
connection D1/D2.
Another resistance is connected to
2
the last system master ODU G1/G2
when multi-refrigeration systems
are connecting with the centralized
controller.
Attach on the wired controller of
2
master IDU or on the front panel