Light, Sound And Image Signals; Adjust The Volume Of The Audio Signals; Overview Of The Signals - Silvercrest MONSIEUR CUISINE CONNECT Operating Instructions Manual

8. Light, sound and image
signals
The "Monsieur Cuisine connect" gives you information
about the status of the device, about the completion of a
function as well as warnings about possible improper
handing.
8.1 Adjust the volume of the audio
signals
To adjust the volume or turn off the sound:
1. Tap the button on the screen.
2. If the menu shown below in the figure does not ap-
pear immediately, tap
Auto
WLAN Click here to select a network
Volume
i
About... your Monsieur Cuisine connect
? FAQ Frequently asked questions
Data protection Privacy statement
Agreements Transfer user data to www.monsieur-cuisine.com
3. In the next window you will see the item Volume.
Right next to it is a slide switch. Tap the item and
move it to the left or right.
- fully to the right: maximum volume
- to the left: reduce volume
- fully to the left: volume off
.
Recipes Start menu
CHANGE
OPEN
OPEN
OPEN

8.2 Overview of the signals

Signal
appears
Audio signal
When the main menu appears, a sig-
When switching
nal will sound indicating the readi-
on
ness for operation.
When turning the The sound indicates that the safety
lid or steamer at- switch has been activated or deacti-
tachment vated.
Automatically displayed on-screen
On-screen
prompts are accompanied by an au-
prompts
dio signal.
Off Device is switched off or in standby
Is permanently lit Device is switched on or
white operation paused
Cooking process active, heating up
White, pulsating
active
Flashes 3x green Process finished
Flashes 3x red Screen dialogue appears
On-screen prompts
Before switching Press the button on the screen to keep
to standby the device active.
When cancelling Use the screen buttons to confirm or
a process reject your previous command.
Meaning
LED ring
GB 13