Dough Kneading; General Program Information; Starting The Program; Pause And End - Silvercrest MONSIEUR CUISINE CONNECT Operating Instructions Manual

14. Dough kneading

With this device you can process up to a maximum of 500 g
flour for heavy doughs and 600 g flour for light doughs.
The program is only operated with the blade assembly 19.

14.1 General program information

- Preset time: 45 seconds (adjustable)
- Maximum time: 2 minutes
- Preset temperature: 0 °C (fixed)
- Preset speed: 4 (fixed)
- Clockwise/anti-clockwise rotation: is controlled by the
program

14.2 Starting the program

1. Fill food into the blender jug 5.
2. Close the blender jug 5 with the lid 24.
3. The device is switched on and shows the start menu.
4. Press the button to enter the automatic programs
menu and then the KNEADING 44 and ---> buttons.
The values for the program appear in the three dis-
play dials.
Auto
00:45
Turbo
NOTE: you can change the values for the time. Tap the
time display dial and make the setting.
5. Press the 35 button. The program is started. The
time set is counted down on the touchscreen 8. The
program automatically controls the anti-clockwise/
clockwise rotation.
6. After the set time has elapsed, a short signal sounds,
the LED ring 10 around the control dial 9 is lit green
and the touchscreen 8 shows the output values of the
program again.
7. Press the on/off switch 7 to switch off the device or
move to the next step in the recipe.
28 GB
Recipes
4 0
0
KNEADING
Ant-clockwise Weighing

14.3 Pause and end

• To stop a program which is running, press:
- II: the time is no longer counted down.
- End pause by pressing
• To end a program which is running, press
- the button
show the presetting of the program.
- Press the
menu.

15. Browning

With this program, you can slightly brown up to 500 g
meat, fish, vegetables, e.g. to release roasting flavours.
Large pieces must first be cut up into chunks.
15.1 General program information
- Preset time: 7 minutes (adjustable)
- Maximum time: 14 minutes
- Preset temperature: 130 °C (adjustable)
- Preset speed: 1 (fixed)
- Clockwise/anti-clockwise rotation: is controlled by the
Settings
program
°C
15.2 Starting the program
1. Put some fat (e.g. oil) into the blender jug 5.
2. Fill food into the blender jug 5.
3. Close the blender jug 5 with the lid 24.
4. The device is switched on and shows the start menu.
5. Press the
menu and then the ROASTING 42 and ---> buttons.
The values for the program appear in the three dis-
play dials.
Auto
07:00
Turbo
NOTE: you can change the values for time and tempera-
ture. Tap the corresponding display dial and adjust with
the control dial.
35.
37. The display dials once again
button to enter the automatic programs
button to enter the automatic programs
Recipes
1
ROASTING
Anti-clockwise
Settings
130
°C
0
Weighing