Product Description; Intended Use - Oase Filtral UVC 1500 Operating Instructions Manual

- EN -

Product Description

Filtral UVC 1500/3000/6000/9000 is an underwater filter with integrated pump and UVC clarifier. The filter media and
the UVC clarifier integrated in the device remove dirt, algae and bacteria.
Scope of delivery
Filtral

A
1500 3000/6000/9000
1
 
2
 
3 –

4 –

5
 
6
 
7
 
8
 
9 –

10 –

11 –

12 –

13 –


Intended use

Only use the product described in this manual as follows:
• For cleaning garden ponds.
• For operation with clean water.
• Operate in accordance with instructions. (→ Technical data)
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• The UVC clarifier installed in the device kills algae and bacteria in the pond water. The UVC lamp may never be
used for any other purpose or outside of the housing.
• Never use the unit with fluids other than water.
• Never run the unit without water.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
Assembly
Operation with water feature
When operating together with a water feature, the device should be set up horizontally.
(→ Set up the device horizontally)
 B, C
The branch valve is mounted together with the nozzle pipe and nozzle insert at the device's output.
• Depending on the nozzle insert used, a specific water feature is created.
Connection to the second output of the branch valve:
• Hose connection for a watercourse/water feature.
• Filtral 1500: Operation is possible either with the fountain or with the optionally available Venturi nozzle.
• Filtral 3000/6000/9000: When using the Venturi nozzle, run the air hose along the nozzle pipe and secure in the
holder on the nozzle connection. The air hose must be able to suck in air, no water may be allowed to enter the air
hose.
Hand-tighten the bolt connections.
18
Description
Underwater filter
2 × screws
− For hanging the underwater filter to a side of the pond.
Connection fitting for ball joint
Branch valve with flow-rate regulators
− Possible connection for water courses/water features, ½".
Union nut
− For securing the upright position of the nozzle pipe.
Nozzle pipe
Nozzle connection with hose bracket
Nozzle inserts (Vulkan, Lava, Magma)
− Creates different water features.
Branch valve with flow-rate regulators
− Possible connection for Venturi nozzle or watercourse/water feature, 1".
Venturi nozzle
− for pond aeration.
Hose
− sucks air into the Venturi nozzle.
Stepped hose adapter with union nut
Reduction element
− Spacer ring for use with the Venturi nozzle or the second output on the branch valve.