- we also keenly value the unique relationship we enjoy with owners of our equipment. We are pleased to welcome you as a Goldacres owner and look forward to making your spray applications as efficient as possible.
The following pages outline important towing capacity of the vehicle to which safety information. At Goldacres safety is the equipment is attached as specified a high priority. These safety and warning by the vehicle manufacturer.
Page 5
All operators should be trained in the safe use of Ag chemicals. Goldacres • It is the responsibility of the operator suggest that a relevant course is completed...
Page 6
Cuts, Stabs & Punctures attachment or removal of the tank from the vehicle. When Servicing machine, be mindful of sharp edges on parts such as trimmed cable ties, • Do not allow any other person to ride on hose clamps, cut reinforced hose and the the vehicle at the same time this vehicle edges of plates and brackets as they could spray tank is fitted.
Page 7
It is very important to ensure that all new machine components and replacement parts include current hazard identification decals. Replacement safety decals can be ordered from all Goldacres dealers. Item No. Part No. Description GA8700006 Decal, Pro-Reel Autowind, Remote Control...
Page 8
GA8700425 Pro-Reel 200L Tank Decal GA8700426 Pro-Reel 300L Tank Decal GA8700427 Pro-Reel 400L Tank Decal GA8700428 Pro-Reel 600L Tank Decal...
Page 9
GA8700429 Pro-Reel 800L Tank Decal GA8700441 Pro-Reel 1000L Tank Decal...
Page 10
2. If you continue to experience problems • Items controlled by or fitted to Non then please contact your local authorised Genuine parts or devices Goldacres dealer. They will advise the • Contamination or corrosion of method of warranty service for your components product.
Any Goldacres Product which has been repaired Subject only to legislative obligations to the by other than an authorized Goldacres dealer in a contrary, Goldacres shall not be liable for incidental way which, in the sole and absolute judgment of...
Goldacres Terms & Conditions (k) to sign any documents or do any things which we may 1. These terms and conditions apply to all goods and/or services supplied by us to you. You are agreeing to them by reasonably require to enable us to register a financing placing an order with us.
Page 13
26.In these terms and conditions, (a) “we”, “us” or “our” means the entity within the Goldacres Group from which you purchase goods and/or services, including, but not limited to: i.
This will assist with receiving chassis is shot blasted, primed and then the most accurate information. The location of protected by the Goldacres paint process for the stamped ID plate is shown below. excellent chemical resistance and durability.
When ordering parts from your Goldacres labelled with the owner’s details, and a brief dealer, please quote: description of the fault. Goldacres is not liable for the return of any goods to Goldacres Serial No or a Goldacres Dealer. The goods must be Part no required returned to the point of sale.
7. Fill main tank with approximately 10% of sprayer. total tank volume of fresh water. Contact Goldacres dealer to ascertain a more 8. Move the bypass unloader lever on the precise tare weight for your sprayer if unsure. pressure control unit outwards to allow the If any alterations are made to the sprayer, it is engine to start with no load.
37Z4V6100.fm 3 ページ 2018年10月4日 木曜日 午後1時54分 Engine COMPONENT & CONTROL LOCATIONS FEATUR The Traymount sprayers are fitted with a FUEL FILLER CAP ® OIL ALERT Honda GX200 motor as standard. It may be ‘‘Oil Alert is FUEL TANK optioned with an electric starter. This section The Oil Aler provides a basic overview of motor features by an insuf...
Page 23
monoxide gas that can collect rapidly in an enclosed area and Carbon Monoxide Hazards you find, or have your servicing dealer correct it, before you remain in the ON position). cause illness or death. For your safety, do not operate the engine in an enclosed area such operate the engine.
Page 24
briskly in the direction of the arrow as shown below. Return the RECOIL STARTER: starter grip gently. OTTLE LEVER 3. Move the throttle lever away from the MIN. position, about 1/3 5. Operate the starter. Pull the starter grip lightly until you feel resistance, then pull of the way toward the MAX.
Page 25
rather than th manufacturer. Some engine procedure. Refer to the instructions provided by the equipment Some engine procedure. Refer to the instructions provided by the equipment the instructio rather than th manufacturer. rather than th manufacturer. 1. Move the throttle lever to the MIN. position. the instructio the instructio For engine s...
Pump PREOPERATIONAL PROCEDURE Diaphragm pumps are a positive displacement If sprayer is in a cold environment, make pump that utilise a number of rubber sure that any frozen water present in diaphragms and non-return check valves to the pump is thawed before attempting pump (displace) the fluid.
Pump Maintenance DIAPHRAGM REPLACEMENT The pump diaphragms are wearing When diaphragms require replacement it is components that need to be replaced during normal practice to replace the air damper the life of the pump. Life expectancy depends diaphragm at the same time. upon pump operation and maintenance and task suitability.
To ensure that you receive the best possible service, it is recommended that you exhaust all applicable troubleshooting solutions shown The troubleshooting information is provided prior to calling your dealer, or Goldacres, for as a reference when your sprayer is not service advice. functioning correctly.
Suction Filter Filling It is essential to maintain all filters, and filter When filling the sprayer it is necessary to use screens, in good condition. Filter screens that an external water source. are not regularly cleaned can severely impede WARNING: Operators must wear the the flow and thus affect delivery pressure.
Tasks prior to spraying 13. When mixing procedure has been followed, fill main tank with appropriate CAUTION: quantity of water required for task at hand. Before using this equipment with a chemical 14. CAUTION: Traymount sprayers fitted with mix, read and understand, the instructions manual hose reels should not exceed 160 on the chemical label.
Flushing correct rate of chemical is applied to the target. The following information is provided as a Follow these steps to calibrate the sprayer: general guide for flushing your sprayer after a 1. Measure the spray width of the nozzle on a spray application dry surface (in metres) For more specific information regarding...
As part of your daily sprayer calibration, investigation is required which may Goldacres suggests that you carry out a jug include, but not be limited to: test to ensure the spray nozzles you are using a.
Chassis: The chassis is an all steel construction, that is fully welded for superior strength. The chassis is shot blasted, primed and then protected by the Goldacres paint process for excellent chemical resistance and durability. Paint Colours: Steel work: G13 Dark Green...
PROREEL CABLE SIZE CHART @ 12vdc / 30 amps 30 amp overload protection Distance from battery to Anderson plug (mts) Cable in mm Connecting to a power Connecting the Engine source Remote Shutdown WARNING: Do not have any power connected The following steps should be followed when connecting to a power source: for this operation.
Operation CAUTION: Keep hands, feet,hair and clothing away from all moving parts to prevent injury. NOTE: Hose will un-wind with a small amount of restriction when pulled out by hand Operation 1. While connected to a power source, the unit is always powered. 2.
Single Reel Controller ® Configuration Configuration This manual provides instructions for the configuration of the Goldacres Pro-Reel® wireless This manual provides instructions for the configuration of the Goldacres Pro-Reel® wireless controller system. controller system. Figure 1: From left to right, Pro-Reel® Control Box, the configuration cable and the hand-held Figure 1: From left to right, Pro-Reel®...
Supplying Power to the each transmitter and receiver are paired using unique identifier codes. Remote Unit and the 2.1 Configuring a Remote Unit to control a Pro-Reel Control Box Control Box’s relays. ® In the event that a remote unit must Refer to figure 2 on page 1 for information on be replaced or a new one added to an the locations of the various parts.
Control Box immediately off again. 5. Now depress the Engine Off button on Troubleshooting the remote unit. The light on the remote unit will turn back on and the light in The following list of items may be used to the control box should also switch on aid in fault finding if the control box fails to and remain on.
Page 47
leaks. Refer to section 1 regarding the receiver board (see figure 2 on page 1). correct selection of battery types. The connector should not be loose but do not tighten further if it is not loose. 4. Perform the configuration procedure Loss of received signal strength that may again as described in section 2.1 but do result from damaged or poorly connected...
Maintenance To ensure that you get the most from your hose reel, it is important to regularly maintain and service. Always use quality multipurpose lubricants. Daily Weekly Monthly Yearly Check hose and filters Check battery condition Check guards ...
To ensure that you receive the best possible service, it is recommended that you exhaust all applicable troubleshooting solutions shown prior to calling your dealer, or Goldacres, for service advice. Problem Possible Cause Possible Remedy...
Turbo 400 spray gun The standard nozzle supplied with the Turbo 400 spray gun is a 2.5mm, please check chart as shown below for other nozzle options. The Turbo 400 spray gun is ideally suited to the pro reel range as it can handle up to 700 psi pressure and a 70 l/min flow rate.
Hose Repair Kit GA490 Surface Finish: Drawing Checked: ONE DEC. PL. ± 0.10 THIS DRAWING REMAINS THE PROPERTY TWO DEC. PL. ± 0.05 OF GOLDACRES TRADING PTY LTD AND IS Approved CHANGE NAME/DATE ECN NO. ANGULAR ± 0.50° GA1100053 Sales Kit, Hose Reel Tube Repair, OD 12mm Nylon Tube DRG.
Drawing Che ONE DEC. PL. 0.10 THIS DRAWING REMAINS THE PROPERTY GA5002237 Pan Head Screw M3 x 35mm TWO DEC. PL. 0.05 OF GOLDACRES TRADING PTY LTD AND IS Approved ME/DATE ECN NO. GA5049465 Nut M3 Nyloc SS ANGULAR 0.50 DRG.
ONE DEC. PL. 0.10 THIS DRAWING REMAINS THE PROPERTY GA5004029 Bolt M6 x 10 TWO DEC. PL. 0.05 OF GOLDACRES TRADING PTY LTD AND IS Approved ANGULAR 0.50 DRG. STANDARD SUB ECT OF COPYRIGHT GA4660515 Adjuster Bracket, Pro Reel Motor 2014...
RTV300 Pro 4,3,3,6 25,26 6,3,3,5 24,23 17,12,12,13 30,12 29,28 45,42,43,44 17,12,12,16 17,12,12,13 38,36,37,37,39,40,41 Pos. Part No. Description Qty. GA4600990 Frame, UTV Pro Reel Tank, 300 Litre, XL Tube, Lid, Strainer, Straps, Sight Tube And GA4901107 Cradle GA5000117 Washer 10mm Flat SS HD GA5006161 Bolt M10 x 25 GR8.8 ZP GA5011175...
Page 63
RTV300 Pro Pos. Part No. Description Qty. GA4582510 Reducer bush 2” M to 1½” F suit skid base tank Hose barb, Elbow, 90 degree, 1½” male thread x 1½” hose, GA5077736 Banjo GA5077709 Hose barb, Straight, ¾” male thread x ¾” hose, Banjo GA5077720 Hose barb, Elbow, 90 degree, 1”...
Need help?
Do you have a question about the Pro-Reel 200L and is the answer not in the manual?
Questions and answers