- we also keenly value the unique relationship we enjoy with owners of our equipment. We are pleased to welcome you as a Goldacres owner and look forward to making your spray applications as efficient as possible.
The following pages outline important towing capacity of the vehicle to which safety information. At Goldacres safety is the equipment is attached as specified a high priority. These safety and warning by the vehicle manufacturer.
Page 5
All operators should be trained in the safe use of Ag chemicals. Goldacres • It is the responsibility of the operator suggest that a relevant course is completed...
Page 6
Cuts, Stabs & Punctures • The tank should be empty during attachment or removal of the tank from the When Servicing machine, be mindful of sharp ATV. edges on parts such as trimmed cable ties, • Do not allow any other person to ride on hose clamps, cut reinforced hose and the the ATV at the same time this ATV spray edges of plates and brackets as they could...
Page 7
Regularly review safety decals with operators. It is very important to ensure that all new machine components and replacement parts include current hazard identification decals. Replacement safety decals can be ordered from all Goldacres dealers. GA8700808 - Traymount T3 – Decal kit...
Page 8
Genuine parts or devices 2. If you continue to experience problems • Contamination or corrosion of then please contact your local authorised components Goldacres dealer. They will advise the method of warranty service for your • Hose reel seal sand O-rings product. •...
• Any Goldacres Product which has been repaired or consequential damage resulting from ownership by other than an authorized Goldacres dealer in a or use of a Product. way which, in the sole and absolute judgment of Goldacres, adversely affects its performance or Goldacres does not authorize any person to create reliability.
Goods. Goldacres shall be under no liability for The benefit of any warranty provided under these terms and conditions shall only be damages arising out of the use of any chemicals, liquids, or mixtures in the Goods nor available to the Purchaser and shall not be transferable by the Purchaser;...
Page 11
Goods (section 132(2)); for Goldacres by way of bona fide sale at full market value and in the ordinary course of its to receive a statement of account if no disposal of Goods for each 6 month period (section business.
This will assist with receiving protected by the Goldacres paint process for the most accurate information. The location of excellent chemical resistance and durability.
37Z4V6100.fm 3 ページ 2018年10月4日 木曜日 午後1時54分 Engine COMPONENT & CONTROL LOCATIONS FEATUR The Traymount T3 is fitted with a Honda FUEL FILLER CAP ® OIL ALERT GX120 motor as standard. It may be optioned ‘‘Oil Alert is FUEL TANK with an electric starter. This section provides...
Page 15
monoxide gas that can collect rapidly in an enclosed area and Carbon Monoxide Hazards you find, or have your servicing dealer correct it, before you remain in the ON position). cause illness or death. For your safety, do not operate the engine in an enclosed area such operate the engine.
Page 16
briskly in the direction of the arrow as shown below. Return the RECOIL STARTER: starter grip gently. OTTLE LEVER 3. Move the throttle lever away from the MIN. position, about 1/3 5. Operate the starter. Pull the starter grip lightly until you feel resistance, then pull of the way toward the MAX.
Page 17
rather than th manufacturer. Some engine procedure. Refer to the instructions provided by the equipment Some engine procedure. Refer to the instructions provided by the equipment the instructio rather than th manufacturer. rather than th manufacturer. 1. Move the throttle lever to the MIN. position. the instructio the instructio For engine s...
Pump Diaphragm pumps are a positive displacement Change the pump oil after the first 50 pump that utilise a number of rubber hours of operation and then after every diaphragms and non-return check valves to 300-350 hours. Use only SAE 30W40 pump (displace) the fluid.
Pump Maintenance The pump diaphragms are wearing DIAPHRAGM REPLACEMENT components that need to be replaced during When diaphragms require replacement it is the life of the pump. Life expectancy depends normal practice to replace the air damper upon pump operation and maintenance and diaphragm at the same time.
To ensure that you receive the best possible service, it is recommended that you exhaust all applicable troubleshooting solutions shown The troubleshooting information is provided prior to calling your dealer, or Goldacres, for as a reference when your sprayer is not service advice. functioning correctly.
Suction Filter It is essential to maintain all filters, and filter screens, in good condition. Filter screens that are not regularly cleaned can severely impede the flow and thus affect delivery pressure. If the screen is in any way damaged, it can allow foreign material into the pumping system which can result in damage to the pump, lines, valves and nozzle tips.
Filling Spray Application NOTE: It is the responsibility of the operator When filling the sprayer it is necessary to use an external water source and wear the to ensure that the chemical mix is sufficiently appropriate PPE. agitated and that the conditions are right to start spraying.
Flushing Storage The following information is provided as a If the sprayer is to be stored for a long period general guide for flushing your sprayer after a of time without use, there are several tasks spray application that need to be performed. For more specific information regarding 1.
Spray Gun - GunJet AA30L The gunjet trigger needs to be locked via the No. AAB30L-¼, GunJet Spray Gun (BSPT trigger lock when not in use to prevent the Threads) gunjet from spraying inadvertently. AB30L-Kit - Spare Parts Kit (Includes all items marked with * and item 7) Pos.
Spray Gun - Nozzle The adjustable brass ConeJet nozzle rotates through a half turn to provide spray selection from wide angle, finely atomized cone spray to a straight stream spray. NOTE: Tip settings “A” and “B” represent two extreme points of rotation in tip adjustment. Liquid Pressure (bar) Adjustable ConeJet Tip...
Tank & Frame Assembly 36 10 37 32 33 33 34 UNLES DIMENS Continued over page UNLESS ± ± 0.00 ±...
Page 27
Rubber Stopper, Diameter 50 x 35 mm Long, With M10 x 35 GA5052815 Stud GA5000141 Nut M10 Nyloc ZP GA5024215 Elbow, Brass, 3/4" Female x 3/4" Female BSPT GA5014955 Serial ID plate, stick on, Goldacres, Black, Unstamped * Sub-assembly shown on following pages.
UNLESS OTHERW DIMENSIONS ARE GA8500020 Tank, Traymount, 300L, includes black flip lid, MY16 UNLESS OTHERW GA5078498 Lid, Hinged, Black plastic, 355mm ± 1 ± 0.5 Continued over page 0.00 ± 0.25 THIS DRAWING REMA OF GOLDACRES TRAD SUBJECT OF C...
Page 29
Tank Assembly Pos. Part No. Description Qty. Filter, Basket type, Diameter 305 x 245 mm deep, Suit main GA5076714 spray tank GA5077708 Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose GA5078156 Tank flange, 1/2" female threads GA5077702 Hose barb, Straight, 1/2"...
Need help?
Do you have a question about the Traymount T3 and is the answer not in the manual?
Questions and answers