- we also keenly value the unique relationship we enjoy with owners of our equipment. We are pleased to welcome you as a Goldacres owner and look forward to making your spray applications as efficient as possible.
The following pages outline important towing capacity of the vehicle to which safety information. At Goldacres safety is the equipment is attached as specified a high priority. These safety and warning by the vehicle manufacturer.
Page 5
All operators should be trained in the safe use of Ag chemicals. Goldacres • It is the responsibility of the operator suggest that a relevant course is completed...
Page 6
Cuts, Stabs & Punctures attachment or removal of the tank from the vehicle. When Servicing machine, be mindful of sharp edges on parts such as trimmed cable ties, • Do not allow any other person to ride on hose clamps, cut reinforced hose and the the vehicle at the same time this vehicle edges of plates and brackets as they could spray tank is fitted.
Page 7
It is very important to ensure that all new machine components and replacement parts include current hazard identification decals. Replacement safety decals can be ordered from all Goldacres dealers. Traymount 200 Decal Kit GA8700507 Traymount 300 Decal Kit GA8700508...
2. If you continue to experience problems then please contact your local authorised • Hose reel seal sand O-rings Goldacres dealer. They will advise the • Pressurised sprayer seals and O-rings method of warranty service for your • Belts, couplings product.
Any Goldacres Product which has been repaired Subject only to legislative obligations to the by other than an authorized Goldacres dealer in a contrary, Goldacres shall not be liable for incidental way which, in the sole and absolute judgment of...
When ordering parts or requesting service chassis is shot blasted, primed and then information for your sprayer, it is important to protected by the Goldacres paint process for quote the serial number and the purchase date 1030 excellent chemical resistance and durability.
DRAWING CHECKED BY: THIS DRAWING REMAINS THE PROPERTY DEBURR AND BREAK DIMENSIONS ARE IN MILLIMETRES THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS DEBU SHARP EDGES DO NOT S OF GOLDACRES TRADING PTY LTD AND IS...
Page 13
DRAWING CHECKED BY: THIS DRAWING REMAINS THE PROPERTY 25/11/2019 DEBURR AND BREAK DRAIN 30M HOSE REEL ± 1 ANGULAR ± 0.50° OF GOLDACRES TRADING PTY LTD AND IS WEIGHT: DRAWING EDITED BY: SHARP EDGES ± 0.5 SUBJECT OF COPYRIGHT 98.46 KG NEALHARVEY DRAWING NUMBER: 0.00...
Key Features Number Description Number Description Main Tank Main Tank Drain Pressure control unit Suction Filter Bypass unloader lever Pump & Motor Main Tank Lid Wet Sight Tube 30m Hose Reel...
7. Fill main tank with approximately 10% of sprayer. total tank volume of fresh water. Contact Goldacres dealer to ascertain a more 8. Move the bypass unloader lever on the precise tare weight for your sprayer if unsure. pressure control unit outwards to allow the If any alterations are made to the sprayer, it is engine to start with no load.
37Z4V6100.fm 3 ページ 2018年10月4日 木曜日 午後1時54分 Engine COMPONENT & CONTROL LOCATIONS FEATUR The Traymount sprayers are fitted with a FUEL FILLER CAP ® OIL ALERT Honda GX200 motor as standard. It may be ‘‘Oil Alert is FUEL TANK optioned with an electric starter. This section The Oil Aler provides a basic overview of motor features by an insuf...
Page 18
monoxide gas that can collect rapidly in an enclosed area and Carbon Monoxide Hazards you find, or have your servicing dealer correct it, before you remain in the ON position). cause illness or death. For your safety, do not operate the engine in an enclosed area such operate the engine.
Page 19
briskly in the direction of the arrow as shown below. Return the RECOIL STARTER: starter grip gently. OTTLE LEVER 3. Move the throttle lever away from the MIN. position, about 1/3 5. Operate the starter. Pull the starter grip lightly until you feel resistance, then pull of the way toward the MAX.
Page 20
rather than th manufacturer. Some engine procedure. Refer to the instructions provided by the equipment Some engine procedure. Refer to the instructions provided by the equipment the instructio rather than th manufacturer. rather than th manufacturer. 1. Move the throttle lever to the MIN. position. the instructio the instructio For engine s...
Pump PREOPERATIONAL PROCEDURE Diaphragm pumps are a positive displacement If sprayer is in a cold environment, make pump that utilise a number of rubber sure that any frozen water present in diaphragms and non-return check valves to the pump is thawed before attempting pump (displace) the fluid.
Pump Maintenance DIAPHRAGM REPLACEMENT The pump diaphragms are wearing When diaphragms require replacement it is components that need to be replaced during normal practice to replace the air damper the life of the pump. Life expectancy depends diaphragm at the same time. upon pump operation and maintenance and task suitability.
To ensure that you receive the best possible service, it is recommended that you exhaust all applicable troubleshooting solutions shown The troubleshooting information is provided prior to calling your dealer, or Goldacres, for as a reference when your sprayer is not service advice. functioning correctly.
Suction Filter Filling It is essential to maintain all filters, and filter When filling the sprayer it is necessary to use screens, in good condition. Filter screens that an external water source. are not regularly cleaned can severely impede WARNING: Operators must wear the the flow and thus affect delivery pressure.
Spray Application Flushing It is the responsibility of the operator to ensure The following information is provided as a that the chemical mix is sufficiently agitated general guide for flushing your sprayer after a and that the conditions are right to start spray application spraying.
REVISIONS Traymount 200L - Tank & Frame Pos. Part No. Description Qty. MATERIAL DRAWN BY: 1-3 MORANG CR. MITCHELL PARK. UNLESS OTHERWISE SPECIFIED JAMES P VICTORIA 3355 AUSTRALIA DIMENSIONS ARE IN MILLIMETRES GA2000209 Hose, Clear, 12mm, Sight tube 25/08/2015 PH: 03 5342 6399...
Traymount 300-400L - Tank & Frame NOTE: 400L TANK SHOWN Pos. Part No. Description Qty. GA2000209 Hose, Clear, 12mm, Sight tube GA8500008 Tank, 300L, Flat Base - Includes lid GA8500009 Tank, 400L, Flat Base - Includes lid GA5076880 Lid, Black, Without breather, Medium, Diameter 355 mm UNLESS GA4600305 Frame, 30m Hose Reel, Traymount, 200-400L...
Hose Clamp, 1 1/2", SS (32-50/12W) DRAWING CHECKED BY: THIS DRAWING REMAINS THE PROPERTY DEBURR AND BREAK OF GOLDACRES TRADING PTY LTD AND IS SHARP EDGES DO NOT SC GA5076259 Hose barb, Elbow, 90 degree, 1 1/2" fly nut end x 32 mm hose...
± 0.25 GA5000117 Washer 10mm Flat SS HD THIS DRAWING REMAINS THE PROP GA5000141 Nut M10 Nyloc ZP OF GOLDACRES TRADING PTY LTD A SUBJECT OF COPYRIGHT GA4400415 Plate, Delta 40 Pump Mount GA5004097 Bolt M6 x 60 GR8.8 ZP...
± 0.25 GA5078498 Lid, Hinged, Black plastic, 355mm THIS DRAWING REMAINS THE PROPERTY DEBURR AND BR OF GOLDACRES TRADING PTY LTD AND IS SHARP EDGE SUBJECT OF COPYRIGHT GA5077710 Hose barb, Elbow, 90 degree, 3/4" male thread x 1/2" hose GA5007231 Hose clamp, Cobra type, 1/2"...
± 0.25 25/11/2019 GA4914030 DRAWING CHECKED BY: THIS DRAWING REMAINS THE PROPERTY DEBURR AND BREAK OF GOLDACRES TRADING PTY LTD AND IS SHEET 4 OF 4 SHARP EDGES DO NOT SCALE DRAWING SUBJECT OF COPYRIGHT UNLESS OTHERWISE S DIMENSIONS ARE IN M UNLESS OTHERWISE S ±...
Spray Gun - GunJet AA30L The gunjet trigger needs to be locked via the No. AAB30L-¼, GunJet Spray Gun (BSPT trigger lock when not in use to prevent the Threads) gunjet from spraying inadvertently. AB30L-Kit - Spare Parts Kit (Includes all items marked with * and item 7) Pos.
Spray Gun - Nozzle The adjustable brass ConeJet nozzle rotates through a half turn to provide spray selection from wide angle, finely atomized cone spray to a straight stream spray. NOTE: Tip settings “A” and “B” represent two extreme points of rotation in tip adjustment. Liquid Pressure (bar) Adjustable ConeJet Tip...
Need help?
Do you have a question about the Traymount 200L and is the answer not in the manual?
Questions and answers