Operating Instructions - Eneo MCB-68V2713M0A User Manual

ULTRA CLEAR RESOLUTION CAMERA

Operating Instructions

Using OSD controller
Setup menu can be accessed and controlled by OSD control joystick on
the side of camera unit. Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Video Sub-out
Connector
Description of the joystick operation
1) SET (●) : Access to the menu or enter the setting.
2) UP/DOWN (▲/▼) : Choose the desired sub-menu and to move the cursor up or down.
3) LEFT/RIGHT (◄/►) : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left or right.
4) ' 'denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS* adjustment
(*) Works only when OSD Menu is inactive.
1) ▲ : Zoom In
2) ▼ : Zoom Out
Using Video format DIP switch
EX-SDI↔HD-SDI: The default setting is EX-SDI mode.
HD-SDI or EX-SDI is selectable by Video format switch only.
AHD, THD, CHD mode is selectable in the menu only.
(SYSTEM> OUTPUT> ANALOG OUTPUT)
OSD Control
Joy Stick
Video format
DIP Switch
3) ◄ : Focus Near
4) ► : Focus Far
15
Cover Open