SmartLock LOCKONE Technical Manual

LOCKONE TE CH NICA L MA NUA L
Default codes (change default codes)
Setup (Master)
Service
Manager
Bluetooth code
Users (1-9)

Open the lock

• Enter the code and open within 4 seconds.
• If time delay is set wait for counting: an acoustic signal indicates open window.
• Enter the code and open within 4 seconds.
Open the lock with time delay override
• Enter override user (9) code.
• Enter second code and open within 4 seconds.
If lock is already counting time delay enter override user (9) code to immediately open.
Open the lock with dynamic codes
User access Lock-One app by entering his login name and password. Check the list of currently assigned
tasks on LockOne app by clicking the refresh button.
Opening with lock keypad (on-line coverage not available in front of the safe)
• User retrieves generated OTC by clicking on "OTC" button of the selected task.
• Once in front of the safe, user press and hold key 4 till double beep.
• Display shows PIN: enter 4-digit user personal identification number.
• Display shows OTC: enter 10-digit received OTC.
• Check entered number and press "OK" to confirm.
• If valid OTC code for entered user PIN, double beep, display shows "OPEN LOCK",
lock can be opened.
• Once lock is closed back, display shows the closing seal. User enters displayed close
seal into the open task on his smartphone app to close opening procedure at the web
server.
• Note: if lock is not physically opened within 3-seconds, the same OTC can be used to
try again.
Check the last closing seal. Press and hold OK: last closing seal will be displayed.
Opening with Bluetooth enabled smartphone (fully on-line process)
• Once in front of the safe, user starts Bluetooth mode on the lock keypad by entering a
valid 6- digit code (default 1-2-1-2-1-2) and then clicks on selected task Bluetooth
button his smartphone app.
• Once communication between smartphone and lock is established and authorization
to open is confirmed, user will be asked to enter is personal identification number
(PIN) into the LockOne app.
• If valid OTC code for entered user PIN, double beep, smartphone app shows "OPEN LOCK", lock can be
opened.
• Once lock is closed back, smartphone app automatically forward
received close seal to the central server to close opening procedure.
• Note: if lock is not physically opened within 3-seconds the process can
be repeated.
5-0-5-0-5-0-5-0
not installed
1-2-3-4-5-6
1-2-1-2-1-2
not installed
CODE
o o o o o o
OPEN
LOCK
PIN
o o o o
OTC
OPEN LOCK
CLOSE SEAL
EH28
1 of 4