Philips S7000 Series Manual page 22

Using the Quick Clean Pod
3 Lift the tab on the seal and pull it by the corner
to remove the seal from the Quick Clean Pod
Cartridge.
4 Press the small circular piece on the handle of
the Quick Clean Pod Cartridge to break the
snap hook on the handle.
5 Place the Quick Clean Pod Cartridge into the
Quick Clean Pod.
6 Put the top of the Quick Clean Pod back onto
the base and turn it clockwise until you hear a
click.
Do not tilt the Quick Clean Pod to prevent
leakage.
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, thoroughly
rinse the shaving heads before you use the Quick
25
English