MSI 880GMA-E55 Series Manual page 19

MS-7623
Chassis intrusion Connector: JCi
this connector connects to the chassis intrusion switch cable. if the chassis is
opened, the chassis intrusion mechanism will be activated. the system will record
this status and show a warning message on the screen. to clear the warning, you
must enter the BioS utility and clear the record.
Parallel Port Header: JLPt
this connector is used to connect an optional parallel port bracket. the parallel
port is a standard printer port that supports enhanced Parallel Port (ePP) and
extended Capabilities Parallel Port (eCP) mode.
ieee394 Connector: J394_
this connector allows you to connect the ieee394 device via an optional
ieee394 bracket.
9