Installation On Suspended Flooring; Positioning And Levelling - AEG 7000 Series User Manual

10 www.aeg.com
We recommend that you keep the packaging and the transit bolts for any
movement of the appliance.
5.4 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15

5.5 Positioning and levelling

F
G
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
1. Install the appliance on a flat hard floor.
2. Loosen or tighten the feet to adjust the
level.
x4
7. Close the holes with the plastic caps
you find in the user manual bag. Put the
smallest cap F in upper hole and the two
bigger caps G in lower holes.
WARNING!
Make sure that carpets do not
stop the air circulation below
the appliance.
Bring the appliance near the
furniture recess before
levelling it. For more details,
refer to paragraph "Building
in".
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.