AEG L7FC8432BI User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L7FC8432BI
  6. User manual

AEG L7FC8432BI User Manual

Hide thumbs Also See for L7FC8432BI:
Table of Contents

Advertisement

Quick Links

L7FC8432BI
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L7FC8432BI

Summary of Contents for AEG L7FC8432BI

  • Page 1 L7FC8432BI User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    1369/2017........................44 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 8 kg (refer to the •...
  • Page 5 ENGLISH • The floor area on which the appliance necessary to change the mains plug is to be installed must be flat, stable, fuse, use only a 13 A ASTA (BS 1362) heat resistant and clean. fuse. • Make sure that there is air circulation •...

  • Page 6: Installation

    2.5 Service • Cut off the mains electrical cable close to the appliance and dispose of • To repair the appliance contact an Authorised Service Centre. • Remove the door catch to prevent • Use original spare parts only.
  • Page 7 ENGLISH 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING! It is strongly recommended that this action is carries out by two persons. 2. Carefully put the appliance down on its rear side. Make sure not to damage the hoses.
  • Page 8 6. Remove the three bolts, the hose holders and plastic spacers by using the spanner supplied with the appliance. 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes.
  • Page 9 ENGLISH 3.5 Positioning and levelling 1. Install the appliance on a flat hard floor. WARNING! Make sure that carpets do not stop the air circulation below the appliance. Bring the appliance near the furniture recess before levelling it. For more details, refer to paragraph "Building in".
  • Page 10 The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance.
  • Page 11 ENGLISH To a stand pipe with vent-hole Directly into a drain pipe at a height of not Ø 40 mm less than 60 cm (23.6”) and not more than 100 cm (39.3”). The end of the drain hose must always be ventilated , i.e.
  • Page 12 If hoses run behind the 596 mm 553 mm appliance, make sure that nothing closes the small recess indicated with the measures 50 x 50 mm. 819 mm 50 mm 50 mm 140 mm 76 mm The appliance is also equipped with an adhesive sponge pad H that you can find inside the drum.
  • Page 13 ENGLISH 1. Remove the screws of the top cover on the rear of the appliance and install the anti- tilting device as shown in the drawing. 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen ~10mm the nut counterclockwise with a 3mm wrench.
  • Page 14 Reversibility of the cupboard door Carry out the cupboard door reversibility before the appliance is built in completely. If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O.
  • Page 15 ENGLISH Set the position of the lower hole respecting 16-22 mm dimensions and distances shown in the drawing (449 mm). Countersink the holes. Ø 35 mm 12,5 - 14 mm 22±1,5 mm 595-598 mm Hinges To mount the hinges it is necessary to drill two holes (dia.

  • Page 16: Product Description

    Counter-magnet The appliance is pre set for a magnetic closure. For a correct closure: 1. Position the screw C and the counter- magnet D on the magnetic plate N. Lean the cupboard door against the screw until it leaves a mark.

  • Page 17: Control Panel

    ENGLISH 5. CONTROL PANEL 5.1 Control panel description Wool/Silk Cottons Denim Cottons Eco Time Temp. Save Sport Synthetics Start/ Pause Delay Delicates 20min 3kg Spin Start Duvet Outdoor Anti-allergy Steam Plus Steam Rinse Spin/Drain Prewash Stains Extra Rinse Soft Plus On/Off...
  • Page 18 The Temperature area: Temperature indicator . Cold water indicator. Child safety lock indicator. Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g.

  • Page 19: Dial And Buttons

    ENGLISH 6. DIAL AND BUTTONS 6.1 Introduction 6.5 Spin When you set a programme, the The options/functions are appliance automatically sets the not available with all maximum spin speed allowed, except for washing programmes. Check programme Denim. With this option you the compatibility between can decrease the default spin speed.
  • Page 20 This option increases the In some programmes the rinses are programme duration. performed with more water. If you touch the Start/Pause button, The corresponding indicator above the the appliance performs the only touch button illuminates and also stays draining phase.
  • Page 21 ENGLISH 6.11 Child Lock very quick cycle for a smaller lightly soiled load (max. half load With this option you can prevent children recommended). from playing with the control panel. the shortest cycle to freshen up a To activate/deactivate this option, hold small amount of laundry.

  • Page 22: Programmes

    7. PROGRAMMES 7.1 Programme Chart Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range Washing programmes 1400 rpm 8 kg White cotton and coloured cotton. Normal, (1400- 400 heavy and light soil.
  • Page 23 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm 2 kg Do not use fabric softener and (1200- 400 Outdoor make sure that there is no soften- 1 kg rpm) er residue in the detergent dis-...
  • Page 24 Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1 kg Cottons, Synthetics, Delicates. Short and gen- tle steam programme to refresh even your very Steam delicate garments, including very delicate gar- ments with sequins, lace etc.
  • Page 25 ENGLISH Programme Reference Maxi- Programme description Default tem- spin speed (Type of load and soil level) perature Spin speed load Temperature range range 1200 rpm 3 kg Cotton and synthetic items lightly soiled or (1200- 400 once worn. 20min 3kg rpm) 30 °C 40 °C - 30 °C...
  • Page 26 Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons Eco ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■...

  • Page 27: Settings

    ENGLISH 8. SETTINGS 8.1 Acoustic signals To activate/deactivate the acoustic signals when the programme is This appliance has different acoustic completed, touch the Prewash and the signals, that operate when: Stains buttons simultaneously for about 2 seconds. The display shows On or Off. •...
  • Page 28 CAUTION! Always follow the Make sure that no laundry instructions that you find on gets caught between the the packaging of the seal and the door to avoid detergent products, but we risk of water leakage and recommend that you do not damage to the laundry.
  • Page 29 ENGLISH • Do not exceed to liquid The related indicator stops flashing and detergent dose indicated on the stays on. flap. The programme starts, the door is • Do not set the prewash phase. locked. The display shows the indicator •...
  • Page 30 10.8 The ProSense System 10.9 Interrupting a load detection programme and changing the options The programme duration in the display is referred to a When the programme is running, you medium/high load. can change only some options: 1. Touch the Start/Pause button.
  • Page 31 ENGLISH 10.11 Opening the door - 10.13 Draining water out after Adding garments end of cycle If you have chosen a programme or an If the temperature and level option that does not empty out the of the water in the drum are water of the last rinse, the programme is too high and/or the drum is completed, but:...

  • Page 32: Hints And Tips

    Turn the programme dial to set a new If you set a programme or an cycle. option that ends with water If the dial is rotated to the "Reset" in the drum, the Stand-by position , the appliance automatically function doesn't deactivate turns off in 30 seconds.

  • Page 33: Care And Cleaning

    ENGLISH 11.4 Ecological hints 11.5 Water hardness • Set a programme without the If the water hardness in your area is high prewash phase to wash laundry with or moderate, we recommend that you normal soil. use a water softener for washing •...
  • Page 34 1. Open the drawer. Press the catch the pockets of your clothes are downwards as indicated in the deposited during the washing cycle in picture and pull it out. the special double lip trap in the...
  • Page 35 ENGLISH rinsing programme without any Regularly check the drain clothes in the drum. pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. •...
  • Page 36 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing. Let the water flow out. 4. When the bowl is full of water, turn the filter back and empty the container. 5. Repeat the steps 4 and 5 until the water stops to flow out.
  • Page 37 ENGLISH 9. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1.

  • Page 38: Troubleshooting

    45° 20° 12.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket. in 'Cleaning the drain pump' paragraph.
  • Page 39 ENGLISH • - No communication between electronic elements of the appliance. Switch it off and switch on again. The programme was not finished properly or the appliance stopped too early. If the alarm code appears again, contact the Authorised Service Centre.
  • Page 40 Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged.
  • Page 41 ENGLISH Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an "Installation instruction". unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to "Installation instruction". •...

  • Page 42: Consumption Values

    2. Disconnect the mains plug from the 4. Take out the laundry and then close mains socket. the appliance door. 3. Pull twice the emergency unlock trigger downward and open the appliance door. The emergency unlock trigger is located where indicated by the following picture.

  • Page 43: Technical Data

    ENGLISH Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Standard cotton programmes 0.82 Standard 60°C cotton 0.56 Standard 60°C cotton 0.53 Standard 40°C cotton 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.30...

  • Page 44: Product Information Sheet In Reference To E.u. Regulation 1369/2017

    16. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark Model L7FC8432BI, PNC914580005 Rated capacity in kg Energy efficiency class A+++ Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of...
  • Page 45 ENGLISH Programme time of the "standard 40°C cotton pro- gramme at partial load in minutes Duration of the left on mode in minutes Airborne acoustical noise emission in db(A) washing Airborne acoustical noise emission in db(A) spinning Built in appliance Y/N The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC .
  • Page 46 www.aeg.com...
  • Page 47 ENGLISH...
  • Page 48 www.aeg.com/shop...

Table of Contents