Table of Contents
Advertisement
Safety
Electrical safety
Electrical
emissions safety
Decontamination
prior to servicing
10
Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual
No. 1520094-000. This product complies with 21 CFR Part 1040.10
for laser products.
Warning Do not look at the laser beam directly. Similarly, do not
continue to look at laser light reflected on a highly reflective substance
for a long duration.
The Multidrop Pico dispenser is TUV certified for the CE mark
signifying compliance with applicable electrical regulations in the
regions where the product is sold. Electrical specifications of the
Multidrop Pico dispenser: voltage 100-240V AC, 1 phase/3 wire, 50/60
Hertz, 2.6A full load amperage.
Caution Do not touch the static eliminator electrode probe located
under the cover guard. Even if device power is off, directly touching the
probe may result in personal injury, electrical shock, or malfunction.
The Multidrop Pico dispenser has passed an FCC/EMC test for
electrical emissions safety. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications to this equipment not expressly approved
by Thermo Fisher Scientific may cause harmful interference, and it
would void your warranty.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case users will be required
to correct the interference at their own expense. This Class A digital
apparatus also complies with Canadian ICES -003.
Service personnel may require you to certify that appropriate cleaning,
decontamination, and other abatement of potential threats to service
personnel have been performed prior to shipping the Multidrop Pico
dispenser for servicing.Recommended cleaning and decontamination
procedures are described in the Cleaning the Multidrop Pico dispenser
section.
Thermo Fisher Scientific
Advertisement
Table of Contents
