Table of Contents
Advertisement
11. Connect the power-adapter port cable to the system board.
Next steps
1. Install the
display
assembly.
2. Install the
wireless
card.
3. Install the
heat
sink.
4. Install the
memory
module.
5. Install the
M.2 2230 solid-state
6. Install the
M.2 2280 solid-state
7. Install the
base
cover.
8. Follow the procedure in
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state
4. Remove the
M.2 2280 solid-state
5. Remove the
wireless
card.
6. Remove the
display
assembly.
7. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
The following images indicate the location of the power-adapter port and provides a visual representation of the removal
procedure.
58
Removing and installing components
drive, if applicable.
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
drive, if applicable.
computer.
computer.
Advertisement
Table of Contents
