Table of Contents
Advertisement
Chapter 3: Using the KVM-04P
Step 7
Now make sure to verify all cables. In particular, keyboard and mouse cables should be checked
because they are easily switched and they use the same type of connector.
Step 8
Attach the power supply to the KVM-04P unit and plug it into a power outlet. You will see the
LED for Port 1 light up, and you will hear a beep. Switch on your monitor.
Step 9
Now power up all computers simultaneously. The first computer that is connected to port PC1
will be shown on the monitor. You may check to see if the mouse and keyboard work after the
system has booted up. If this is OK, use the "Select" button to choose the next computer and ver-
ify the functionality in the same way. If you find errors, re-check all cables for proper connections
before going to the troubleshooting section of this manual.
5
Advertisement
Table of Contents
