Chapter 3: Using the KVM-04P
In Auto-Scan mode, the KVM-04P unit will switch to the next computer every 10 seconds. This
means that all computers will be shown on the monitor in a row, starting with the first computer
after the last one has been shown.
In this mode, there is no mouse or keyboard control, which is needed to prevent errors. Erratic
input will result if a mouse move or keyboard key press is given just as the unit switches to the
next computer.
To exit Auto-Scan mode, press the SPACE BAR. The KVM-04P will stop at the last computer
shown.
Optional cable
Model No. KCB-3036F or KCB-3031 6 ft. (180cm) 3 to 3 KVM Cable is available.
7