US Shift Quick 2 GEN2 Installation And Operation Manual page 23

MAIN MENU
Home Screen = Chooses the home screen as your
default view.
Info Screen = Shows current sensor values, replacing
the home screen as default view. Info includes TPS
voltage and percentage, battery voltage, commanded pressure in PSI, and
engine RPM.
Setup Menu = Use this menu to choose preliminary settings essential for
operating the vehicle.
Tune Menu = The tune menu can be used to make adjustments to shift timing,
shift feel, and torque converter clutch settings.
Diagnostics = The diagnostics menu provides access to advanced
troubleshooting data and procedures.
Tutorial = Plays a demo on the display with instructions on how to use the
interface. It can be interrupted by turning the knob, which will show the main
menu. The tutorial will continue to play until you select home screen, info
screen, or turn off the vehicle.
Display Off = Keeps the screen off until you turn the knob. The display will
continue to switch off until you select home screen, info screen, or turn off the
vehicle.
SETUP MENU
TPS Setup = Clicking this will take you to the TPS Setup menu, which shows
the idle and WOT settings as well as the current voltage of the TPS. Clicking
once will open the menu. Clicking AutoSet TPS will take you through the steps
to calibrate your throttle position sensor settings. You can also manually adjust
these settings by clicking Adjust Idle or Adjust WOT. Reset TPS will erase the
saved TPS data from the controller, reverting back to the TPS voltages saved in
the loaded tune file. See page 9 for more details.
Speedo Out = Provides configuration options for the speedometer output. See
page 18 for more details.
23