Addition (Plus); Subtraktion (Minus) - KALEAS LDM 500-60 Operating Instruction

continuous measurement option. The determined minimum value is
used automatically for the Pythagorean calculation.
 The computed result may also be greater than 60 m.

Addition (Plus)

The addition can be carried out with any of the units of measure-
ment (length, surface area, volume). You can also include the
measurement results of functions (surface area, volume, Pythago-
ras) in the addition. Only values of the same unit can be added. The
unit is established by the first measured value.
If the result of an addition is stored in the measured value memory,
the individual values of the sum are also stored.
 The computed result may also be greater than 60 m.
1x
short
1x
short
1x
short
1x
short

Subtraktion (Minus)

The subtraction of measured values is carried out in the same man-
ner as the addition.
 The computed result may also be greater than 60 m and / or a neg-
ative number.
...
1x
short
...
32
Measuring value 1 (distance/surface area/volume)
 Display [4]
Initiating an addition
 Display [4]
 Display [3]
Measuring value 2 (distance/surface area/volume)
 Display [4]
 Display [3]
 Display [4]
 Display [2]
 Display [3]
Initiating a subtraction
 Display [4]
 Display [3]
LDM 500-60 ENGLISH
Value 1
+ ---
Value 1
+ Value 2
Value 1
Added value (value 1 + value 2)
Value 1
Value 2
– ---
Value 1
© KALEAS GmbH & Co. KG