Continuous Measurement; Measured Value Functions; Surface Area - KALEAS LDM 500-60 Operating Instruction

LDM 500-60 ENGLISH

Continuous measurement

With continuous measurement, a measurement series is determined
sequentially, and the maximum and minimum values of the series
are dis-played. To do so, move the meter along a base surface or
edge from which you want to measure the distances. You can use
this, for example, to check the parallelism of opposing walls or
measure extreme values when using a function.
 Die continuous measurement will end after 60 s automatically.
>2 s Laser [B] is activated,
1x
short

Measured value functions

The LDM 500-60 offers integrated functions to make further pro-
cessing of measurement results easy.
 You must select the desired function prior to each measurement.
 If the same function is to be carried out repeatedly, you only need
to press the corresponding button again 1 time.

Surface area

1x
short
1x
short
1x
short
© KALEAS GmbH & Co. KG
the meter starts the continuous measurement.
Display [8]
Display [4]
Display [2]
Display [3]
End continuous measurement.
Laser [B] is activated, meter is ready for measuring.
Display [6]
Measuring length
Measuring width
 Display [4]
 Display [2]
 Display [3]
Current measured value
Max. measured value
Min. measured value
, the corresponding line is flashing.
Surface area (length x width)
Length
Width
29